 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 2STL1360 2STX1360 Low voltage fast-switching NPN power transistors Features Very low collector-emitter saturation voltage High current gain characteristic Fast-switching speed Applications Emergency lighting LED Voltage regulation Relay drive Figure 1. Internal schematic diagram TO-92 TO-92L Description The devices are NPN transistors manufactured using new "PB-HCD" (power bipolar high current density) technology. The resulting transistor shows exceptional high gain performances coupled with very low saturation voltage. Table 1. Device summary Marking L1360 X1360 Packages TO-92L TO-92 Packaging Bag Bag Order codes 2STL1360 2STX1360 October 2009 Doc ID 11763 Rev 3 1/10 www.st.com 10 Electrical ratings 2STL1360, 2STX1360 1 Electrical ratings Table 2. Symbol VCBO VCEO VEBO IC ICM IB IBM PTOT TSTG TJ Absolute maximum ratings Value Parameter 2STX1360 2STL1360 Collector-base voltage (IE = 0) Collector-emitter voltage (IB = 0) Emitter-base voltage (IC = 0) Collector current Collector peak current (tP < 5 ms) Base current Base peak current (tP < 5 ms) Total dissipation at Tamb = 25 C Storage temperature Max. operating junction temperature 1 80 60 6 3 5 0.2 0.4 1.2 -65 to 150 150 V V V A A A A W C C Unit Table 3. Symbol RthJA Thermal data Value Parameter TO-92 Thermal resistance junction-ambient __max 125 TO-92L 104 C/W Unit 2/10 Doc ID 11763 Rev 3 2STL1360, 2STX1360 Electrical characteristics 2 Electrical characteristics Tcase = 25 C unless otherwise specified. Table 4. Symbol ICBO IEBO VBE(on) VCE(sat) (1) VBE(sat) (1) hFE (1) Electrical characteristics Parameter Collector cut-off current (IE = 0) Emitter cut-off current (IC = 0) Base-emitter on voltage Collector-emitter saturation voltage Base-emitter saturation voltage DC current gain RESISTIVE LOAD Delay time Rise time Storage time Fall time Transition frequency Test conditions VCB = 80 V VEB = 6 V VCE = 2 V IC = 2 A IC = 3 A IC = 2 A IC = 0.1 A IC = 1 A IC = 100 mA IB = 100 mA IB = 150 mA IB = 100 mA VCE = 2 V VCE = 2 V 80 160 17 81 620 54 130 630 650 130 180 0.9 Min. Typ. Max. 100 100 730 300 500 1.2 Unit nA nA mV mV mV V 400 20 100 720 65 ns ns ns ns MHz td tr ts tf fT IC = 3 A VCC = 10 V IB(on) = - IB(off) = 300 mA VBE(off) = - 5 V IC = 0.1 A VCE = 10 V 1. Pulse test: pulse duration 300 s, duty cycle 2 % 2.1 Electrical characteristics (curves) Figure 2. DC current gain (VCE = 5 V) Figure 3. DC current gain (VCE = 2 V) Doc ID 11763 Rev 3 3/10 Electrical characteristics Figure 4. Collector-emitter saturation voltage Figure 5. 2STL1360, 2STX1360 Base-emitter saturation voltage Figure 6. Resistive load switching time Figure 7. Resistive load switching time Figure 8. 1000 C (pF) Capacitance CEB f = 1 MHz 100 CCB 10 0.1 1 10 V R (V) 100 4/10 Doc ID 11763 Rev 3 2STL1360, 2STX1360 Electrical characteristics 2.2 Test circuit Figure 9. Resistive load switching test circuit 1. Fast electronic switch 2. Non-inductive resistor Doc ID 11763 Rev 3 5/10 Package mechanical data 2STL1360, 2STX1360 3 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. 6/10 Doc ID 11763 Rev 3 2STL1360, 2STX1360 Package mechanical data TO-92 bulk shipment mechanical data mm. DIM. MIN. TYP MAX. A b D E e e1 L R S1 W V 4.32 0.36 4.45 3.30 2.41 1.14 12.70 2.16 0.92 0.41 5o 4.95 0.51 4.95 3.94 2.67 1.40 15.49 2.41 1.52 0.56 0102782 D Doc ID 11763 Rev 3 7/10 Package mechanical data 2STL1360, 2STX1360 TO-92L MECHANICAL DATA DIM. mm. MIN. 7.80 0.35 4.70 4 3.70 2.44 1.27 13.30 1.28 0.35 14.30 1.58 0.55 4.10 2.64 TYP MAX. 8.20 0.45 5.10 A b D D1 E e e1 L S1 W 7854933 A 8/10 Doc ID 11763 Rev 3 2STL1360, 2STX1360 Revision history 4 Revision history Table 5. Date 20-Oct-2006 16-Jul-2007 29-Oct-2009 Document revision history Revision 1 2 3 Initial release Added figures 2, 3, 4, 5, 6, 7 and 8 Updated Figure 8 on page 4 and TO-92 package mechanical data Changes Doc ID 11763 Rev 3 9/10 2STL1360, 2STX1360 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10 Doc ID 11763 Rev 3 |
Price & Availability of 2STL136009
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |